5
Dual-a V-tail mixer
Gyro sensitivity setting:
GR7FA offers three potentiometers to adjust the sensitivity for X,Y and Z axis independently.
Nine clock position as the negative maximum sensitivity , three clock position as the
positive maximum sensitivity and twelve clock position as zero sensitivity.
Firstly you can try all the axis sensitivity about 50%.After some trying, you can adjust the
sensitivity by flight feeling feedback.
GR7FA support gyro function switch on and off in flying by Switching signal of CH5,ppm width
<1200uS gyro function on, and ppm width >1800uS gyro function off.
Servo selection guide:
The servos must be digital, high speed ,high resolution and large servo travel. If you want to
adjust servo travel under mixer mode of GR7FA,please adjust in ”END POINT ”item on
transmitter.
LED status indicated under normal working status:
RED LED
GREEN LED
Status
flash
off
No signal searched
off
solid
Signal is very good
Sometime flash
solid
Signal is not very good
flash
flash
Signal is weak
Summary of Contents for GR7FA
Page 5: ......
