Ensure the axis direction is out of four kind types description below. Fixed GR7FA reference
the information mentioned in axis description pictures on receiver’s box.
Turn on FASST transmitter, turn off any mixer feature on the transmitter, firstly set stick
trimming and sub-trim parameters to zero .Preset all sensitivity at about 40~60%, Select the
proper mode
of mixer on GR7FA and power on it, check and adjust
aileron, elevator or rudder to the neutral position of control surface. Adjustment can be done
by stick trimming on the transmitter.
If mode selection and sensitivity changed, please
power the GR7FA again to let new feature take effect.
Check all servo controlling that you need under flying is correct. Reverse the servo direction
on the transmitter if need. Roll the model along the x, y or z axis alone to check the
compensation direction that you want as the picture show.
If compensation direction is reversed, set the sensitivity value reverse.
If any sensitivity
changed, please power the GR7FA again to let new feature take effect.
Summary of Contents for GR7FA
Page 5: ......
