Bay Networks Remote Annex, User Manual

Page: 20 / 90

Remote Annex Server Tools for Windows NT
®
User Guide
Chapter 2 Selecting Server Tools Options
2-4
You can double-click on a group name from the Remote Access
Groups list, to move it to the Groups list. If you want to change
your selections, highlight the group from the Groups list box
and click on Remove, or double-click the group name.
If you install Remote Annex Server Tools for Windows
NT
®
on a
primary domain controller, the groups you select here must have local
log on privileges to allow authentication. For more information about
this privilege, refer to Installing Remote Annex Network Software for
NT
®
included with your documentation set.
RADIUS Security
▼
If you select RADIUS as your security protocol, select the Authentication
Server and Accounting Server in the RADIUS Servers list box.
If the only options available in these two drop–down lists
are local and same as authentication server you need to
create a list of servers from which to choose. For more
information on this procedure, see
Configuring a
RADIUS Server on page 2-13. Additional information
regarding RADIUS security can be found in Chapter 4.
Third Party Security 1. If you are using external software security SecurID, click the
SecurID Regime radio box selection, and all of the fields
become dimmed.
2. When you have completed your Security setup, click on OK to
set the changes you made and close the dialog box.
3. Click on Cancel to close the dialog box without saving or
applying your changes.
4. Click on Apply to set your changes and leave the Server Tools
Options window open on your desktop. Use this option if you
want to make changes in any of the other tabbed dialogs.