Bay Networks Remote Annex Page 12 User Manual Download

Page: 12 / 90

Remote Annex Server Tools for Windows NT

User Guide

Chapter 1 Introduction

1-2

Windows NT

Server Access Security Features

Remote Annex Server Tools for Windows NT

works with a Windows

Server to provide access security. You define user and group access

parameters in Windows NT

, and link the appropriate group definitions

with the Remote Annex using the Server Tools Options graphical user
interface.

Remote Annex Server Tools for Windows NT

allows you access to the

standard Remote Annex log file, a RADIUS server log file, and the
Windows NT

Event Log.

Using Remote Annex Documentation

In addition to this manual, you need the Remote Annex Administrator’s
Guide for UNIX

or the

Module 5399 Remote Access Concentrator Network

Administrator’s Guide

and the

Remote Annex 6300 Supplement to the

Remote Annex Administrator’s Guide for UNIX . These guides provide
reference, procedure, and feature descriptions for the Remote Annexes
in a UNIX environment.

Be aware that minor differences exist between Windows NT

-based

erpcd and UNIX-based erpcd. This section lists these issues, and guides
you to the appropriate manuals.

User Authentication Issues

Remote Annex Server Tools for Windows NT

takes full advantage of

Windows NT

Server user authentication and authorization. Logon and

remote dial-in events trigger security services from Windows NT

. For

information about Remote Annex Server Tools for Windows NT

user

authentication, see Chapter 2, Chapter 3, and Chapter 4

in this guide.

Summary of Contents for Remote Annex



























































































Search results

Summary of Contents for Remote Annex

Reviews:

Related manuals for Remote Annex

Brands by name

Popular brands

Bay Networks Remote Annex, User Manual

Search results

Summary of Contents for Remote Annex

Reviews:

Related manuals for Remote Annex

Brands by name

Popular brands