O
PERATION
3-2
Click on OK and the Object will appear on the screen as an icon. If you want to
move the icon, turn off Lock first. (Remember to turn Lock back on once the icon is
in place.)
3.2
Configuring Managed Objects
Now that the icon has been created, you can edit the settings for the Router. Hold
the mouse button down over the icon and when the fly out menu appears, select the
Configure option and then the Set Clock command in the sub-menu. The following
dialogue box will appear:
Figure 11: Clock Setup
Amend the details in this screen if necessary and click on OK to set them. The icon
should start to flash yellow at this point. This is to remind you that the configuration
changes you have made have not yet been saved.
If you close the Map down, you will notice that the icon for the sub-map is also
flashing yellow. This colour reminder will even flash over the specific area of the
Root map to remind you that configuration changes have been made but not saved.
To save the changes, click and hold the button down over the flashing icon, select
Save Configuration from the fly out menu. Click on OK in the save dialogue box
and the changes that you have made will be saved. The icon should return to Green
to show that everything is OK.
The next option in the Configure menu is Paths. Clicking on this will cause the
following dialogue box to appear:
