5
Cascade A Out Connector
Provides an attachment point for connecting this unit to
another unit via the cascade cable. A return cable from
another unit’s Cascade A Out connector to this unit’s
Cascade A In connector completes the stack connection
(see the example shown in
Figure 3
).
Unit Select Switch
The Unit Select switch (up = Base) determines the base
unit for the stack configuration (see
“Base Unit
Description
” on
page 7
). The Unit Select switch status is
displayed on the BayStack 450 LED display panel (see the
Using the BayStack 450 10/100/1000 Series Switch guide
for details). When in the Base (up) position, all other Unit
Select switches in the stack configuration must be set to
Off (down).
Note:
For stacking three or more units
(maximum 8 units per stack), order the optional
1 meter (39.27 inch) cascade max-return cable
(Bay Networks Order No. AL2018001).
