manualshive.com logo in svg

Bay Networks BayStack 303, User Manual

Share
Download
Bay Networks BayStack 303 User Manual Download Page 41

Installing the BayStack Switches

893-01010-A

2-7

 

Completing Rack Mounting Installation

Once the switch is secured to the rack, connect the devices and apply power using 
the following steps:

1.

Attach all devices to the ports.

See 

“Attaching Devices to the BayStack Switch

” on 

page 2-8

.

2.

Attach the power cord to the back of the switch.

The BayStack switches do not have a power on/off switch. When you connect 
the AC power cord to a suitable AC outlet, the switch powers up immediately. 

3.

Attach the other end of the power cord to a grounded AC power outlet.

As soon as the cord is plugged into the AC outlet, power is applied to all 
components in the switch. 

With power applied to the switch, power-up diagnostics are performed and the 
switch goes into normal switch mode. No configuration is required unless 
changes are necessary or network management is required. To do basic switch 
configuration, see 

“Initial Setup of a BayStack Ethernet Switch

” on 

page 2-15

. To understand the complete software interface, see 

Chapter 3, 

“Customizing and Managing the BayStack Switches

.”

Warning: 

Removal of the power cord is the only way to turn off power to 

this device. The power cord must always be connected in a location that 
can be accessed quickly and safely in case of an emergency.

89301010.BK  Page 7  Tuesday, June 10, 1997  8:00 PM

Summary of Contents for BayStack 303






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands