manualshive.com logo in svg

Bay Networks BayStack 303, User Manual

Share
Download
Bay Networks BayStack 303 User Manual Download Page 13

 

893-01010-A

 

xiii

 

 

Preface

 

Congratulations on your purchase of the Bay Networks

 

®

 

 BayStack 303 Ethernet 

Switch or the BayStack 304 Ethernet Switch. The BayStack

 

™

 

 Ethernet switches 

are intended for small segment workgroups and power-user desktops and provide 
both 10BASE-T ports and 100BASE-T ports. 

 

Purpose

 

This guide presents information about using the features and capabilities of the 
BayStack 303 and 304 Ethernet Switches, installing a switch, and configuring the 
switch through the user interface.

 

Audience

 

This guide is intended for Ethernet administrators with the following background:

•

Working knowledge of basic Ethernet and network management concepts and 
terminology

•

Familiarity with 10BASE-T and 100BASE-T specifications

•

Working knowledge of tools and procedures for installing and operating 
sensitive electronic equipment

 

89301010.BK  Page xiii  Tuesday, June 10, 1997  8:00 PM

Summary of Contents for BayStack 303






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands