Bay Networks BayRS Notice Download Page 98

Page: 98 / 104

BayRS Version 13.10 Document Change Notice

300020-C Rev. 00

show syslog base

The

show syslog base

command displays statistics of the Syslog

global entity.

This command has no optional filters (flags).

The output of

show syslog base

includes the following information:

show syslog log-host

The

show syslog log-host

command displays statistics associated with any

Syslog log-host object configured on the device.

This command supports the following command filters (flags) and filter
arguments:

State

The configured state of the Syslog service

Maximum Active Hosts

The maximum number of remote Syslog hosts configured to
receive messages from this device

Poll Iteration Timer

The number of seconds that Syslog waits to reinitiate a polling
cycle across all slots

Operational State

The actual state of the Syslog service (up/down)

# Active Seq. Hosts

The number of hosts receiving time-sequenced Syslog
messages from the router

# Active Non-seq. Hosts The number of hosts receiving Syslog messages on a

slot-by-slot basis from the router

# Messages Sent

The total number of Syslog messages forwarded to all remote
Syslog hosts configured on this device

-log-host

<IP_address>

]

Displays statistics for all Syslog hosts configured on this
device. By adding an IP address, the command displays
the statistics of a specific Syslog host.

-active

Displays the list of remote hosts configured and actively
receiving Syslog messages from this router.

-inactive

Displays the list of remote hosts configured but not
receiving Syslog messages from this router.

-enabled

Displays log-host objects that have a configured state of
enabled.

-disabled

Displays log-host objects that have a configured state of
disabled.

Summary of Contents for BayRS









































































































Search results

Summary of Contents for BayRS

Reviews:

Related manuals for BayRS

Brands by name

Popular brands

Bay Networks BayRS, Notice

Search results

Summary of Contents for BayRS

Reviews:

Related manuals for BayRS

Brands by name

Popular brands