Bay Networks 3395A Configuration Manual Download | Manualshive

Page: 73 / 146

background image

Configuring IPXCP Connections

893-826-A

4-15

SERVER IPX SAP Characteristics

The following are optional SERVER characteristics that control SAP-related
activity on the Ethernet connection of the communication server:

•

DEFINE/SET SERVER IPX SAP [BROADCAST] setting

This command specifies whether or not the server will broadcast SAP
information to other devices on the Ethernet network and, if the
information is broadcast, how much information the server will send.
Valid choices for setting are: FULL, CHANGE, and NONE. FULL means
that the server will broadcast the entire contents of the SAP table.
CHANGE means that the server will only broadcast new or changed SAP
information. NONE means that the server will not broadcast any SAP
information. The default is FULL.

•

DEFINE/SET SERVER IPX SAP [BROADCAST] TIMER timer

This command specifies how frequently the communication server will
broadcast SAP information on the Ethernet network. Valid values for timer
are whole numbers between 0 and 4294967295 (seconds). The default
interval is 60 seconds.

•

DEFINE/SET SERVER IPX SAP [BROADCAST] DISCARD
TIMEOUT timer-multiple

This command specifies how long the server keeps SAP information that it
receives from other devices connected to the Ethernet network. The
timer-multiple that you specify is multiplied by the value you specify in
the DEFINE/SET SERVER IPX SAP [BROADCAST] TIMER time
command. Valid values for timer-multiple are whole numbers between 0
and 4294967295. The default is 3.

•

DEFINE SERVER IPX SAP [MAXIMUM] TABLE SIZE table-size

This command specifies the maximum number of entries in the IPX
Service Advertisement Protocol (SAP) table. If you change this value, the
change will take effect after you reinitialize the server. Valid values for
table-size are whole numbers between 0 to 16000. If you specify 0 (the
default), the server can maintain an unlimited number of entries.

Specify PORT Characteristics

PORT characteristics control IPX-related activity over PPP links. The
following is a summary of these PORT characteristics that you must set to
allow user-to-LAN connections.

Basic PORT IPX Characteristics

The following command enables a PPP port to negotiate use of the IPX
Protocol:

•

DEFINE/SET PORT port-list [PPP] IPX ENABLED/DISABLED

ENABLED means that the port will negotiate use of the IPX Protocol
when the user attempts to connect via IPX/PPP, effectively allowing the
connection. DISABLED means that the port will not negotiate use of the
IPX Protocol when the user attempts to connect via IPX/PPP.

«
...
71
72
73
74
75
...
»

Summary of Contents for 3395A



















































































































































Reviews:

No comments

Related manuals for 3395A

DSN-4100 Series

Brand: D-Link Pages: 2

OfficeConnect 3C19500

Brand: 3Com Pages: 52

Brand: QNAP Pages: 39

Brand: sysmik Pages: 2

SuperServer E102-9W-C

Brand: Supermicro Pages: 103

R120d-1E N8100-1954F

Brand: NEC Pages: 166

Brand: Sun Oracle Pages: 6

Brand: DNP Pages: 2

BullSequana Edge nano

Brand: Atos Pages: 29

x3105 - System - 4347

Brand: IBM Pages: 130

System x3650 Type 7979

Brand: IBM Pages: 194

Brand: myTEM Pages: 2

Brand: D-Link Pages: 40

Brand: NEC Pages: 10

Brand: NEC Pages: 20

Brand: NEC Pages: 2

Brand: NEC Pages: 18

Brand: NEC Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands