35
EN
USER’S MANUAL
ARD
2.3. AUTO OFF SETUP
When scale is on and at zero and stable, long press
key enter the auto off setup, use
key to enable or disable.
Then press
key to confirm and back to weighing mode.
Mode “on”
– scale will turn off after 10 minutes haven’t been use; to be able to use the scale, needs to turn on the on/off
switch.
Mode “off”
- Function disable.
2.4. DIVISION SETUP
When scale is on and at zero and stable, long press
key enter the division setup, use
key to select the divisions.
Then press
key to confirm and back to weighing mode.
2.5. CONFIGURATION OF DATE AND HOUR
The user must keep pressed at the same time the keys
and
to go to the next parameter.
Press the key
to view the Year, the Month, the Day, the Hour, the Minute, the Second, etc.
At this moment, press the key
, to go to the checking modes and modification ones.
Modification mode
: When the hour starts to blink, change data, and press the key
to save the changes and go to the chec-
king mode.
THE DATA APPEAR LIKE THAT
1.
Clk 24/12
: (clock) to choose between the system 24-hours or the system 12-hours.
Press the key
to change the data.
2.
APM A/P
: (am pm) system 12-hours. “a” for the morning, “p” for the afternoon.
Press the key
to change the data.
In the system 24-hurs, it cannot be changed, showing “—”.
3.
YEA 00
: (year) Introduce the number “12” for “2012”. The biggest number is 99.
Press the key
, the decimal digit is added through “1”. Press the key
, the other digit is added through “1”.
4.
Mon 00
: (month) Introduce the month, “4” for April. The biggest number is 12.
Press the key
, the decimal digit is added through “1”. Press the key
, the other digit is added through “1”.
5.
Dte 00
: (day) Introduce the number of the day. The biggest number is 31.
Press the key
, the decimal digit is added through “1”. Press the key
, the other digit is added through “1”.
6.
Hou 00
: (hour) Introduce the hour, “8” for the 8:00. In the system 12-hours, the biggest number is 12. In the system 24-hours,
the biggest number is 23.
Press the key
, the decimal digit is added through “1”. Press the key
, the other digit is added through “1”.
7.
Min 00
: (minute) Introduce the minute, “30” for 30 minutes. The biggest number is 59.
Press the key
, the decimal digit is added through “1”. Press the key
, the other digit is added through “1”.
8.
Sec 00
: (second) Introduce the second “30” for 30 seconds. The biggest number is 59.
Press the key
, the decimal digit is added through “1”. Press the key
, the other digit is added through “1”.
9.
Day 00
: (day) Introduce the number of the day, . “0” for Sunday, ”1” for Mondays… The biggest number is 6.
3. CALIBRATION
Setting up division, decimal point, max. capacity and calibration
Press and hold
key, then turn on the scale, to enter division setting.
Note:
If the display shows
C1 C3
press the key
before continuing.
