manualshive.com logo in svg

baxter PW1E, Operator'S Manual, Page: 7 / 20

Share
Download
baxter PW1E Operator'S Manual Download Page 7

– 7 –

ADVANCED CONTROLS  - RETARDER/PROOFER

The Retarder/Proofer has several options to choose from the control panel.

•  Manual Proof Operation
•  Manual Retard Operation
•  Automatic Retard and Proof Operation

START-UP:

ON/OFF -

 Turn on/off the setup mode.

TEMPERATURE UP

 or 

DOWN ARROW -

 Press to 

set the temperature level.

TEMPERATURE WINDOW -

 Displays the current 

temperature. Displays set temperature when being 

adjusted.

HUMIDITY UP

 or 

DOWN ARROW -

 Press to set the 

humidity level.

HUMIDITY WINDOW -

 Displays the current humidity. 

Displays set humidity when being adjusted.

TIMER NUMBER ARROW -

 Press to select a timer 

(1 to 4).

TIMER START/STOP BUTTON -

 Press to start/stop 

the timer.

TIMERS UP

 or

 DOWN ARROW -

 Press to set the 

desired time.

TIMERS WINDOW -

 Displays the hours and minutes 

remaining on the timer.

ARROW BUTTONS -

 Use with LCD operation.

LCD PANEL -

 Displays all setup options of the Proofer, 

Retarder, or automatic Retard/Proofer operation.

CONTROL

To enter the operation mode, press ON/OFF button 

(Fig. 1).

OPERATION MODE:

The LCD panel displays three options after the ON/

OFF button is pressed (Fig. 2).

Fig. 1

Fig. 2

Summary of Contents for PW1E





















Reviews:

No comments