INSTRUCTIONS
Solo Innova
Page 5
1.1.1
Control panel (standard)
The boiler temperature is adjusted from here.
See also Section 1.4.
A
D
C
F
N
H
O
I
P
E
210680.11
Fig. 1.1.1
(A)
Space for weather compensation system
(C)
Thermometer
(D)
Fuse
(E)
Switch for circulation pump
(F)
Switch for fan
(H)
Overheating thermostat – Restarting knob
(I)
Thermostat
(N)
Reset switch
(O)
Switch to open door
(P)
Minimum thermostat
1.1.2
Filling door
The big filling door makes adding fuel easy.
1.1.3
Primary air control
The primary air of combustion is set here.
1.1.4
Secondary air control
The secondary air of combustion is set here.
1.1.5
Ash door
Combustion takes place behind this door and ashes are removed through it.
1.1.6
Sight glass
Combustion can be monitored through the sight glass.
1.1.7
Exhaust stack
An exhaust pipe is ducted to the chimney.
1.1.8
Induced-draft fan
Ensures the required air supply for combustion.
1.1.9
Cleaning damper
Detachable cleaning damper for cleaning the heat exchanger pipe.
1.1.10
Type plate
Indicates factory no. and type and other information required to order spare parts.
Factory no. and type can be noted in Section 5 on the last page of this user guide.
1.1.11
Cooling spiral
Thermal protection.
1.1.12
Flue gas turbulators
Ensure the correct flue gas temperature.
1.1.13
Heat exchanger pipe
The heat is transferred to the boiler water here.
1.1.14
Filling chamber
For the firewood.
1.1.15
Fuel tunnel
Air of combustion is added to the flue gases and they are burned here, ensuring high
efficiency.
Description of more important components (layout see Fig. l.l).
