background image

2

© Baxi Heating UK Ltd 2006

CONTENTS

Compact Heat Pump Safety Information

3

Warranty Statement

4

Technical Data

5

Setting the Compact Heat Pump to work

6

Operating Instructions & Troubleshooting

7

Elevation of typical installation

8

Installation clearances

9

Hood removal clearances

10

Typical underfloor schematics

11

Ground plumbing illustration

12

Slinky® manifold connections

13

Plumbing connections

14

Output pump bleed port

15

Purge pumps

16

Purging the ground arrays

17

Typical Underfloor Wiring Connections

18

Control box layout

19

Wiring connections

20

Installation instructions

21

Installation instructions

22

Section

Page

© Baxi Heating UK Ltd 2006 

All rights reserved. No part of this publication may

be reproduced or transmitted in any form or by any means, or stored in any
retrieval system of any nature (including in any database), in each case whether
electronic, mechanical, recording or otherwise, without the prior written
permission of the copyright owner, except for permitted fair dealing under
Copyrights, Designs and Patents Act 1988.

Applications for the copyright owner’s permission to reproduce or make other
use of any part of this publication should be made, giving details of the proposed
use, to the following address:

The Company Secretary, Baxi Heating UK Ltd, Pentagon House, 
Sir Frank Whittle Road, Derby, DE21 4XA.

Full acknowledgement of author and source must be given.

WARNING:

Any person who does any unauthorised act in relation to a

copyright work may be liable to criminal prosecution and civil claims for damages.

Summary of Contents for Geoflo

























Reviews: