Baxi Bioflo Assembly Instructions Manual Download Page 5

© Baxi Heating UK Ltd 2010

Bioflo

Biomass Pellet

Central Heating

System Boiler

Supplementary Operating Instructions 

for the UK

Read the Operating Manual and these Supplementary

Instructions carefully before using the boiler

USER OPERATING INSTRUCTIONS 

Please read the important notices overleaf before referring to the 
Operating Manual book for detailed operating instructions.

RECOMMENDED FUELS

The boiler is designed to burn only specialised compressed wood pellets which are
detailed in the main instruction book. These pellets must meet the DINplus quality
standard.

The recommended suppliers for the pellets is: -

For a local distribution outlet please telephone on;
Tel: +44 (0)28 6641 1001

For an interactive map of local distributors please view the following website;
Web site:  http://www.brites.eu/

UNDER NO CIRCUMSTANCES SHOULD YOU ATTEMPT TO BURN ANY
OTHER TYPE OF FUEL INCLUDING PELLETS THAT DO NOT MEET THE
DINPLUS STANDARD.

SERVICE AND MAINTENANCE

This appliance should only be installed, serviced and maintained by HETAS Ltd
trained operatives. Contact Heateam for suitable trained operatives on 0844 871
1568.

WARNING NOTE

Properly installed, operated and maintained this boiler will not emit fumes into the
dwelling. Occasional fumes from de-ashing and re-fuelling may occur.  However,
persistent fume emission is potentially dangerous and must not be tolerated. If
fume emissions persist, then the following immediate action should be taken:-

a)

Open the doors and windows to ventilate room

b)

Let the fire go out, remove and safely dispose of fuel from the appliance

c)

Check flue or chimney blockage clean if required

d)

Do not attempt to relight the fire until the cause of fume emission has been 
identified and corrected. If necessary seek expert advice.

The most common cause of fume emission is flueway or chimney blockage. For
your own safety these must be kept clean at all times.

General

Before lighting the boiler check with the installer that the installation work and
commissioning checks have been carried out correctly and that the chimney has
been swept clean, is sound and free from any obstructions. As part of the boilers’
commissioning and handover the installer should have shown you how to operate
the boiler correctly.

Do not light the boiler if there is a possibility that any part of the heating system
may be frozen.

Summary of Contents for Bioflo







Reviews: