contact with the heater.
!
Always
use genuine Baxi Fires Division spares.
Never
!
Never
leave children unsupervised in a room where the heater is ON and
unguarded.
!
Never
obstruct or cover the fan outlet or force items into heater openings.
!
Never
install or use the heater anywhere where water is in use, i.e.
Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.
!
Never
use aerosols or steam cleaners on or around the heater.
!
Never
route the mains supply cable under carpet etc.
!
Never
install the heater close to curtains or combustible materials.
!
Never
use the heater to dry clothes etc.
!
Never
sit or stand on the heater.
FITTING THE HEATER
The installation of this heater requires a reasonable level of DIY skills.
Please read this guide thoroughly before commencing installation and if in doubt,
seek help from a competent person
Do I need any tools?
1.
Depending on which style of fascia you have you will need the below screwdrivers: -
A Pozidrive / Phillips / cross head
screwdriver. This should have a number 2 size end.
A Flat end
screwdriver.
2.
For drilling into brickwork you will need a power drill (preferably with hammer
action) and appropriate size drill bit for the wall plugs supplied (See figure 3).
Where can I fit the heater?
This heater can be fitted into fireplaces or surrounds where the following dimensions
are available.
Width
390mm - 450 mm (15.35 inches - 17.72 inches)
Height
555mm - 590 mm (21.9 inches - 23.2 inches)
Depth
At least 75mm (At least 3 inches)
The heater is of a slim design and should suit most fireplace openings and fire
surrounds. However, there may be some applications that require the need for a spacer
where a fireplace opening or fireplace surround opening are not available i.e. a flat wall.
Page 4
INSTALLER AND OWNER GUIDE