FUEL BED REFITTING - CERAMIC COALS
This section is for models supplied with ‘Coal’ effect fuel bed only.
For ‘Pebble fuel bed’ see section ‘fuel bed refitting - ceramic pebbles’
1.
Place the rear base coal in the firebox.
It should rest on the ledges at the rear
sides of the burner unit. When located
gently move the rear base coal so that it is
as far forward as possible. The amount of
movement will be negligible (See figure
4).
2.
Place the front base coal in the firebox
with its bottom front locating over the
front rim of the firebox. Pull the coal
forward so that it locates immediately
behind the front rim of the firebox.
(See figure 5).The front base coal will
touch the rear base coal as it is located.
Page 10
OWNER GUIDE
Figure 5. Front base coal position
Figure 4. Rear Base Coal Position
