USING THE HEATER
Important Safety
Never cover the heater or obstruct any openings on the heater, this could cause
overheating and consequent risk of fire.
What are the three switches for?
The heater is operated by three switches located on the right hand side of the heater.
Switch 1 =
O
Main On - Off
In the On position only the fuel effect operates
Switch 2 =
I
1kW fan heat setting and fuel effect
Switch 3 =
II
2kW fan heat setting and fuel effect
The switches are mechanically interlocked, so when switch 1 is turned off, all switches
turn off.
CLEANING AND MAINTAINING THE HEATER
How do I Clean my heater?
The heater fascia and glass parts need only to be wiped clean with a dry soft cloth, do
not use polishes or abrasive materials.
I have a problem with my heater!
Important Safety
Before undertaking maintenance or replacing the light bulb(s) always disconnect
the heater from the electricity supply by removing the 3 pin plug and allowing the
heater to cool.
1. My heater is on but there is no light / low light.
This is possibly a light bulb failure. Remove the light bulb as below and check it in a
table lamp that is known to work. If it does not work in the table lamp then replace it as
below.
The light bulbs fitted to this heater are 60Watt E27, 240Volt, triple life, Edison fitting
with a clear finish. Due to the indeterminate life span and ease of replacement, they are
specifically excluded from the guarantee.
Page 8
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
