Automatic Cut Out
A cut out is fitted to the heating element to prevent damage due to over heating.
If it operates due to an obstruction in the airflow, the heater must be turned off
and allowed to cool for 15 minutes and the obstruction removed before restarting.
Care and Cleaning
The heater and glass parts need only to be wiped clean with a dry soft cloth, do
not use polishes or abrasive materials.
Fault Finding
No light from the fuel effect:
possibly a lamp failure. Remove the lamp as
detailed above and check it in a table lamp that is known to work.
No heat or light:
check the wall socket by plugging in a known working
appliance. If functional check the 13A fuse in the heater plug. If either fuse or
socket is suspected, have them checked by an electrician.
Light but no heat:
The automatic cut out, may have operated, see Automatic
Cut Out section.
What should I do when I’m ready to dispose of my heater ?
The plug should be removed from the mains cable and the mains cable cut from
the heater. These should be disposed of with the heater.
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check your local
authority or retailer for recycling advice
Baxi Heating UK Limited 2005
