Page 5
Installation Instructions
ZMX+EXP32
SAFETY
If you have any problems contact Baxall Security Ltd.
WARNING
Installation is only to be carried out by competent, qualified and experienced personnel in accordance
with the country of installations National Wiring Regulations.
This unit contains no user-serviceable parts inside.
This unit must not be used in a medical and/or intrinsically safe application.
Do not exceed the voltage and temperature limits given in the specification. Only operate this unit in
a clean, dry, dust-free environment.
DAMAGE REQUIRING SERVICE
Unplug the unit from the mains outlet and refer servicing to qualified service personnel under the following
conditions:
When the power supply cord or plug is damaged.
If liquid has been spilled into the unit, or objects have fallen into the unit.
If the unit has been exposed to rain or moisture.
If the unit does not operate normally when following the operating instructions.
If the unit has been dropped or the casing has been damaged.
If the unit exhibits a distinct change in performance.
If the unit has no power even when the power supply appears to operate correctly. If this is the case
then ask a service engineer to test the internal fuse.
ELECTROMAGNETIC COMPATIBILITY (EMC)
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference, in which case,
the user may be required to take adequate measures.
The product must be installed in accordance with good installation practice, to enable the product to function as
intended and to prevent problems. Refer to your agent for installation guidance.
Contact Baxall Security Ltd to obtain a specification defining the acceptable levels of product degradation with
regard to EMC immunity.
MANUFACTURERS DECLARATION OF CONFORMANCE
The manufacturer declares that the product supplied with this document is compliant with the essential protection
requirements of the EMC directive 89/336 and the Low Voltage Directive LVD 73/23 EEC. Conforming to the
requirements of standards EN 55022 for emissions, IEC801 parts 2, 3 and 4 for immunity and BS415 superseded
by EN60950 for Electrical Equipment safety.
