manualshive.com logo in svg

Bavaria Vision 46, Owner'S Manual

Share
Download
Bavaria Vision 46 Owner'S Manual Download Page 66

Owner‘s manual 

66

8.10. 

In general

A 

BAVARIA Vision 46

 is a powerful vessel. Therefore it should only be handled by trained and experienced helmsmen. 

Do not leave unreliable people or children without supervision on board.  The cabin rooftop with its glazed areas and 

the aft platform are not part of the working deck. Always switch off the engine controls on the main switch board 

below deck when the boat is on a mooring or at anchor and people might go to swim or dive - this prevents the engine 
to be started with people in the water! 
Make sure all crew learn about the special features and the handling of the engine controls.

 

» Do not step on the aft platform or the forward deck area when the craft is under way.

 

»

Be careful when handling the hatches, there should be no objects or parts of the body in the 

vicinity and in the swiveling range of the aft platform - there is a jamming danger 

 

» There are moving parts on the engine or the propulsion units - avoid contact - Danger! 

8.11. 

Risk of Flooding/Sinking

Caution

 

» If you leave the craft for a longer period - close the seacocks!

 

»

The bilge pumps are not capable to pump large quantities of water, with a large hull open

-

ing the boat will sink. 

 

» Keep the level of bilge water to a minimum.

 

»

In rough weather, hatches, lockers and companionway/doorways should be closed to mini

-

mise the risk of water ingress.

 

» Care should be taken to ensure that the cockpit drains are not blocked and that the cockpit 

can drain freely. 

 

» Ensure all limber holes are clear

 

»

Check function of bilge pumps regularly & clear debris from their inlets.

Caution

 

»

The following openings shall be closed when under way, and care should be taken to 

observe this warning. Do only open these temporarily if necessary for the operation of the 
craft.

Pos. Description

Pos.

Description

1

Forward deck hatch

5

Portlights aft cabin

2

Portlights cabins

6

Saloon windows and hatches

3

Portlights heads

7

Deck hatches heads

4

Portlights towards Cockpit

8

Companionway

The boat has a quickdraining cockpit as per EN/ISO 11812:2002. Nevertheless water ingress should be avoided and 

the drainage of water must not be impaired. Care should be taken to ensure that the cockpit drains are not blocked 
and that the cockpit may drain freely. 

Summary of Contents for Vision 46























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands