Bavaria 32
Bavaria Yacht Bau GmbH
(39)
– 15 –
2. Installations and circuits
2.1 Tanks and piping - water
2.1.1 Fresh water, drinking water –cold
The yacht has a water tank in the aft with a capacity of 150 l. Fresh water is supplied via a water inlet
(with a blue cover) at the transom, port side. You can take water from the tank over a hose connection
leading to the pressure water-pump.
This pump, establishing the complete cold water circulation, is fitted below the pantry. An interruption of
the operation of the pressure pump is done by cutting off all ducts. All pipes/hoses should be checked for
leaks if the pump continuous working though all ducts were cut off properly.
The pump is protected by a filter which should be regularly checked and cleaned if necessary.
Components:
Note
Exchange the water in tank from time to time.
Additionally you should use common purifiers.
2.1.2 Sea-water circulation
Sea-water is necessary for both WC flushing and engine cooling (see: 2.9).
2.1.3 WC –installation: see enclosed directions for use
Attention
If you are not aboard for a longer time you should
close all sea-valves.
Summary of Contents for BAVARIA 32
