-2-
Lay down the short pack with the control bar area pointing up. Open the zipper and put
the batten bundle [quiver] and both rear leading edge [wing tubes] to the side. If you
are flying with non-split wheels, slide these on the speed bar now, before mounting it.
The bow of the speed bar is pointing up, when assembling. Alternatively the use of a
profiled bautek- Alu-speedbar [with or without wheels] is an option. Attach the speed
bar right and left with the push-pins at the control bar corners.
Now turn the wing over so it lies on the control bar and open the Velcro ties.
Unfold the rear sail-halves to the rear and the swivel-tip of the right and left outside [=
rear] leading edge tube towards the front in the direction of the keel.
Summary of Contents for Kite
Page 1: ...Operating instructions April 2009 bautek Fluggeräte GmbH Gewerbegebiet 54344 Kenn Deutschland ...
Page 15: ... 14 ...
Page 16: ... 15 ...
Page 17: ... 16 ...