Bausch Datacom DinBox ROUTER 3G, User Manual

Page: 47 / 71

DinBox Router 3G User Manual
Page 47 of 71
Pass-through, select Disable.
L2TP Pass-through ： Layer Two (2) Tunneling Protocol, an extension to the PPP protocol
that enables ISPs to operate Virtual Private Networks (VPNs). L2TP merges the best
features of two other tunneling protocols: PPTP from Microsoft and L2F from Cisco
Systems. To allow L2TP tunnels to pass through the router, L2TP Pass-through is enabled
by default. To disable L2TP Pass-through, select Disable.
Click the Save Settings button to save your changes. Click the Cancel Changes button
to cancel unsaved changes.
3.3.5 Access Restrictions
3.3.5.1 WAN Access
Use access restrictions, you can block or allow specific types of Internet applications. You
can set specific PC-based Internet access policies. This feature allows you to customize
up to ten different Internet Access Policies for particular PCs, which are identified by their
IP or MAC addresses.
Two options in the default policy rules: "Filter" and "reject". If select "Deny”, you will deny
specific computers to access any Internet service at a particular time period. If you choose
to "filter" ， It will block specific computers to access the specific sites at a specific time
period. You can set up 10 Internet access policies filtering specific PCs access Internet
services at a particular time period.
Access Policy: You may define up to 10 access policies. Click Delete to delete a policy or
Summary to see a summary of the policy.
Status: Enable or disable a policy.
Policy Name: You may assign a name to your policy.
PCs: The part is used to edit client list, the strategy is only effective for the PC in the list.