DinBox PSTN Reference manual – V1.3
Bausch Datacom NV
20
$F – Fast Connect Control
3-95
V92 +P and –Q Commands
3-96
+PCW - Call Waiting Enable
3-96
+PMH - Modem-on-Hold Enable
3-97
+PMHT – Modem-on-Hold Timer
3-98
+PMHR - Initiate Modem-on-Hold
3-99
+PIG - PCM Upstream Ignore
3-100
+PMHF - V92 Modem-on-Hold Hook Flash
3-100
+PQC - V92 Phase 1 and Phase 2 Control
3-101
+PSS - Use Short Sequence
3-102
-QCPC - Force Full Startup Procedure Next Connection
3-103
-QCPS - Enable Quick Connect Profile Save
3-103
S-Parameters
3-104
S0 - Number of Rings to Auto-Answer
3-106
S1 - Ring Counter
3-106
S2 - Escape Character
3-106
S3 - Carriage Return Character
3-106
S4 - Line Feed Character
3-106
S5 - Backspace Character
3-107
S6 - Wait Time before Blind Dialing or for Dial Tone
3-107
S7 - Wait Time for Carrier, Silence, or Dial Tone
3-107
S8 - Pause Time For Dial Delay
3-108
S9 - Carrier Detect Response Time
3-108
S10 - Lost Carrier To Hang Up Delay
3-108
S11 - DTMF Tone Duration
3-108
S12 - Escape Prompt Delay (EPD)
3-109
S14 - General Bit Mapped Options Status
3-109
S16 - Test Mode Bit Mapped Options Status
3-109
S17 - Point Of Sale Options Selection
3-110
S19 - Reserved
3-111
S20 - Reserved
3-111
S21 - V24/General Bit Mapped Options Status
3-112
S22 - Speaker/Results Bit Mapped Options Status
3-112
S23 - General Bit Mapped Options Status
3-113
S24 - Sleep Inactivity Timer
3-113
S25 - Delay To DTR Off
3-113
S26 - RTS to CTS Delay
3-113
S27 - Bit Mapped Options Status
3-114
S28 - Bit Mapped Options Status
3-114
S29 - Flash Dial Modifier Time
3-115
S30 - Disconnect Inactivity Timer
3-115
S31 - Bit Mapped Options Status
3-115
S36 - LAPM Failure Control
3-116
S38 - Delay Before Forced Hang Up
3-116
S39 - Flow Control Bit Mapped Options Status
3-117
S40 - General Bit Mapped Options Status
3-117
S41 - General Bit Mapped Options Status
3-118
S46 - Data Compression Control
3-118
S48 - V42 Negotiation Control
3-118
S86 - Call Failure Reason Code
3-119
S91 - PSTN Transmit Attenuation Level
3-120
S92 - Fax Transmit Attenuation Level
3-120
S95 - Extended Result Codes Control
3-120
S210 – V34 Symbol Rates
3-121
