4
Safety precautions
The Audio Frequency System is built in accordance
with today’s state of engineering and is safe to
operate. Individual components and the finished unit
are inspected continually by our qualified staff within
the framework of our Quality Assurance Provisions.
Each unit is subjected to thorough testing prior to
shipment. It is imperative to every person who is
involved with the installation, start-up, operation and
maintenance to have read and understood the
complete Operating Instruction. It is the
responsibility of the customer to ensure that only
authorized persons may be allowed to use the unit.
Operators must notify immediately any changes to
the unit that detract from the its safety.
The Audio Frequency System Locator Set is
intended to be used exclusively for route tracing
and fault location of electrical cables and
metallic gas and water pipes.
Any other or additional use is deemed to be in
contravention of the intended use. The
manufacturer shall not be liable for damage
resulting from any such use. In such a case the risk
shall be borne solely by the user.
The local safety and accident prevention
regulations are always applicable to the
operation of the unit.
Warranty
At the customer’s written request we undertake to
repair or replace at our discretion and as quickly as
possible all parts that become faulty as the
demonstrable result of poor material, faulty design
or defective workmanship. We shall bear the costs
of any faulty parts requiring replacement, but not the
costs of transport to us and back to the customer,
nor the costs of packing and insurance! The
12
month warranty
time starts from delivery. We shall
not be liable for any damage resulting from normal
wear and tear, improper handling, non-observance
of Operating Instructions and safety regulations. We
shall also refuse to accept any liability if the
customer carries out repairs or changes to the unit
themselves or has others carry them out! The
warranty does not cover damage in transit,
batteries, fuses and any readjustments in
accordance with the Operating Instructions!
We draw attention in addition to the
‘General Sales
and Business Conditions’
of:
BAUR Prüf- und Messtechnik GmbH
Raiffeisenstrasse 8
A-6832-Sulz / Austria
Summary of Contents for TG 20/50
Page 2: ...2 ...
