12
AGP acoustic ground probe
The AGP is used for acoustic pin-pointing and tracing and detects acoustic and electro-
magnetic signals. The AGP has a resonantly mounted sensor for the detection of
structure-borne noise. Ambient noise is automatically suppressed thanks to multi-level
signal processing.
To adjust the height of the handle:
»
Press the button (1) in the recess on the handle and set the de-
sired height.
To fit the handle to the AGP:
»
Place the handle in the quick-release fastener (3) on the AGP and
rotate to the right until it engages.
When the handle is fitted, it is aligned parallel to the directional
arrow (2).
To remove the handle from the AGP:
»
Rotate the handle to the left and remove from the AGP.
For reliable contact with the ground on solid surfaces, a tripod
is fitted to the underside of the AGP. A contact tip can be screwed in for cable fault
pin-pointing on loose surfaces, e.g. sand, or on meadows.
Available contact tips: 50, 100 and 150 mm (optional: 300 mm).
CU operating state indicator
The LED on the CU indicates the following operating states:
•
(flashing): The CU is in pairing mode.
[
Ü
“Pairing protrac® system components”]
•
(permanently on): The CU is switched on and paired to the Bluetooth® devices.
•
(permanently on): The AGP is muted
(prevention of hearing damage).
•
(permanently on): The switching off process is underway.
protrac® pin-pointing system
822-186-4
Product information
