Baumuller DSM1, Commissioning And Maintenance Instructions

Page: 4 / 26

TAM00720 4
DSM1 10/2015
Three-phase-synchronous motor English
1 General safety instructions
1.1
Safety
This electric motor was built complying with the state of safety engineering and the operational safety
was checked prior to leaving the company.
Please, pay attention to the following in order to ensure a proper commissioning and its safe use:
• The present commissioning- and maintenance instructions and attached supplementary parts, if
required.
• The attached safety- and commissioning notes.
• The technical product documentation.
• The commissioning- and safety notes of the inverter’s manufacturer.
• The national, local and plant-specific regulations regarding the final product.
• The motor must be operated with appropriate inverters, only.
• All components related to the motor must comply with the application rules.
In dealing with this product the following dangers are pointed out:
Dangers due to
• lifting operations and transport processes
• electric current
• moving parts
• hot surfaces
• EMC interferences
• Mechanical overload
• thermal overload
Please, pay attention to all safety notes - especially those, which are marked by symbols, in order to
avoid danger to persons and material assets or to minimize existing residual risks.
Risk of fatal injury from electrical current
The symbol indicates that injuries, which result in death or serious injuries could occur, if not
avoided.
Warning of general dangers
The symbol indicates that severe personal injuries or property damage could result, if not
avoided.
Warning of dangerous situations
The symbol indicates that the installation or work environment could be damaged, if not
avoided.
Do not touch
The symbol indicates that severe injuries could result, if not avoided.
Unauthorized action
The symbol indicates that severe injuries could result, if not avoided.
Warning of hot surfaces
The symbol indicates that, if not avoided, could result in severe injuries.
Electrostatic sensitive devices
The symbol indicates that the installation or work environment could be damaged, if not
avoided.