Baumuller BM5-SSL, Instruction Handbook Manual

Page: 29 / 80

29
of 78
Instruction handbook Safe STO logic BM5-SSL
Document No. 5.18007.02
5
P
ACKAGING AND
T
RANSPORT
Before transport, we package every Baumüller device in such a manner that damaging
occurring during transport is very unlikely.
5.1 Transport
BM5-SSL are packaged at the factory according to the order.
h Avoid heavy shaking and concussions during the transport.
h Avoid static discharges on the electronic components of the BM5-SSL .
h Only remove the BM5-SSL from the protective packaging immediately before
assembly.
5.2 Unpacking
Upon receiving the still-packaged BM5-SSL :
h Check to see if any transport damages can be found!
If so:
h Immediately file a complaint to the supplier. Confirm the complaint in writing and
immediately contact the representative of Baumüller Nürnberg GmbH who is assigned
to assist you.
CAUTION!
Danger due to electrostatic discharge!
The BM5-SSL (specifically its electronic components) can be damaged or totally
destroyed if exposed to electrostatic discharges by being touched by hand.
Therefore:
m Follow the rules and instructions on handling components sensitive to electrostatic
discharge when handling the
BM5-SSL .