Baumuller b maXX 3000, Instruction Handbook Manual

Page: 55 / 220

Design and Function
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11
55
of 218
4
4.3 UL notes
The notes below must be observed in case you consider UL 508 C.
Z Requirements to the energy supply: power supply – on page 27
Z Required environmental conditions – on page 29
Z Requirements for the motor temperature sensors – on page 95
Z Connections – from page 120
Connections from Z Page 120 – to Z Page 145 –
n
For use with grounded wye sources only or equivalent.
n
Note the maximum surrounding air temperature.
n
Use in a pollution degree 2 environment only.
n
Motor over-temperature sensing is required. Drive intended to
be used with motors that have thermal sensor mounted in or on
the motors.

Connection see Z Connecting diagrams – from page 98
n
Position of wiring terminals to indicate the proper connec-
tions for the power supply, load, control circuit, and similar
devices refer to
Z Page 120 –
.
n
Note tightening torque values marked for field terminals.