Baumuller b maXX 1000, Parameter Manual

Page: 122 / 210

Parameter description
Parameter manual b maXX
®
1000
Document no. 5.07004.03 Baumüller Nürnberg GmbH
122
of 208
4.3
P1201
The multi-function input terminals (refer to
Z
P1091
–
to
Z
P1094
–
are used to select one
of the b maXX
®
1000 multi-step speeds. The speeds (frequencies) are determined by
Z
P1210
–
to
Z
P1203
–
as shown above.
P1202
The multi-function input terminals (refer to
Z
P1091
–
to
Z
P1094
–
are used to select one
of the b maXX
®
1000 multi-step speeds. The speeds (frequencies) are determined by
Z
P1210
–
to
Z
P1203
–
as shown above.
P1203
The multi-function input terminals MI3 to MI5 or MI7 to MI12 (refer to
Z
P1091
–
to
Z
P1093
–
and
Z
P1095
–
to
Z
P1100
–
) are used to select one of the b maXX
®
1000 multi-
step speeds. The speeds (frequencies) are determined by
Z
P1189
–
to
Z
P1203
–
, for fur-
ther information see
Z
Figure 24
–
on page 78.
P1204
This parameter displays the ramp function generator input after PID control.
P1201 13. Stufengeschwindigkeit 0.00 to 600.00 Hz
EE 13th step speed frequency 0.00 Hz
ON BM_u_13StepSpeedFrequency 100:1 -
P1202 14. Stufengeschwindigkeit 0.00 to 600.00 Hz
EE 14th step speed frequency 0.00 Hz
ON BM_u_14StepSpeedFrequency 100:1 -
P1203 15. Stufengeschwindigkeit 0.00 to 600.00 Hz
EE 15th step speed frequency 0.00 Hz
ON BM_u_15StepSpeedFrequency 100:1 -
P1204 Anzeige Hochlaufgebereingang nach PID Rege-
lung 0.00 to 600.00 Hz
- Display RFG input after PID control 0.00 Hz
A BM_u_DisplayRFGInputPIDControl 100:1 -