manualshive.com logo in svg

Baumr-AG SRG450, User Manual, Page: 6 / 19

Share
Download
Baumr-AG SRG450 User Manual Download Page 6

Stump Grinder 

 

E&OE 

© 2017 Baumr-AG 

4 

•

 

Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before 
beginning again. 

•

 

Whatever happens, you should always park the machine on even ground, disengage the drive, activate 
the parking, turn off the engine and wait until all moving parts have stopped before leaving the operating 
position behind the machine. 

Movement/Transport 

•

 

To turn and steer the machine, press down on the handle and turn on the back wheels. 

•

 

Turn off the engine and allow it to cool at least 2 minutes before transport. 

•

 

Be careful and use safe lifting and moving techniques when loading/unloading the machine. 

•

 

We recommend having two people to lift the machine. 

•

 

Activate the parking brake during transport. 

•

 

Fasten the machine properly in place with approved fasteners, such as tension belts, chains or rope. 
Always check that you are in compliance with applicable traffic regulations before transporting the 
machine. 

Storage 

•

 

Allow the engine to cool before storing the machine. Never store the 
machine near an open flame. 

•

 

Store the machine with the fuel valve closed.  

•

 

Store the machine and fuel in such a way that there is no risk that 
leaking fuel or fumes can come in contact with flames or sparks from 
electrical machine, electric engines, relays, switches, boilers or similar. 

•

 

Store the machine in a locked space away from children and adults 
untrained in use of the machine. 

•

 

Never store or operate the machine near an open flame. 

•

 

Keep children away from the machine. Never allow children to operate the machine. 

Serious accidents can occur if you fail to be on guard for children near the 
machine. Never assume that children will stay put where you last saw them. 

•

 

Be particularly careful near corners, bushes trees or other objects that block 
your view. 

Fuel system 

•

 

Only store fuel in containers approved for that purpose. 

•

 

Never remove the fuel cap and fill the fuel tank when the engine is running. 

WARNING

 

Gasoline and gasoline fumes are poisonous and extremely flammable.  
Be extra careful when handling gasoline, as carelessness can 
result in personal injury or fire. 

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

Summary of Contents for SRG450




















Reviews:

No comments