manualshive.com logo in svg

Baumr-AG SRG450, User Manual, Page: 5 / 19

Share
Download
Baumr-AG SRG450 User Manual Download Page 5

Stump Grinder 

 

E&OE 

© 2017 Baumr-AG 

3 

Preparation 

•

 

Make sure that you always have first aid equipment at hand when using the machine. 

•

 

Make sure nobody else is in the vicinity of the machine when you start the engine, the drive or run the 
machine. 

•

 

Make sure animals and people maintain a safe distance from the machine. 

•

 

Clear the area of objects such as stones, toys, steel wire, etc. that could become caught in moving 
machine parts and thrown out. 

•

 

Find and locate all fixed objects in the ground, such as sprinkler systems, poles, water valves, bases for 
washing lines, etc. Be certain to check for hidden electrical cables or similar in the surface of the lawn. 
Always run the machine around these objects. Never intentionally run the machine over foreign objects. 

•

 

Check the dead man’s grip and all guards are fitted and functioning. DO NOT use the machine if it is not 
working properly. 

•

 

Make sure no clothing, long hair or jewellery can catch in moving machine parts. 

•

 

Use mouth protection, protective gloves with good grip and protective clothing which you can move 
unrestricted. Also use leg protection to protect your legs from sparks and the cutting tools. 

•

 

Never use the machine when barefoot. Always wear protective boots with anti-slip and preferably with 
steel toes. 

•

 

Use a helmet with a full face visor or a mesh visor and protective glasses. Wear approved ear-protection 
when running the machine. Ask tour dealer about approved protective glasses, ear protection and 
recommended helmets. 

 

 

Operation 

•

 

Do

 NOT 

use the machine on grades of more than 10

º

.

 

•

 

Do

 NOT 

use the machine if you are tired, if you have consumed alcohol, 

or if you are taking other drugs or medication that can affect your vision, 
judgement or coordination.

 

•

 

Never use the machine indoors or in spaces lacking proper ventilation.  

•

 

Make sure you have a proper foothold when using the machine, particularly when 
reversing. Always walk – do NOT run. Never work in wet grass. Poor traction may 
cause you to slip. 

•

 

Keep your hands and feet away from moving parts. 

•

 

Keep your hands and feet away from the work tools. 

•

 

Do

 NOT 

use your feet or other parts of your body to gain greater bearing 

pressure against the stump.

 

•

 

Smoking, open flames or sparks in the vicinity of the machine are 

strictly

 

forbidden. Gasoline is extremely flammable and carelessness in handling 
can result in personal injury of fire. 

•

 

Never use a machine with a deflective muffler. 

•

 

In very warm and dry climates, stump grinder operation poses a risk of forest fires. 

Always use approved protective clothing and approved protective equipment when using the 
machine. Protective clothing and protective equipment cannot eliminate the risk of accident, but 
wearing proper clothing and the correct equipment will reduce the degree of injury should an 
accident occur.  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

Summary of Contents for SRG450




















Reviews:

No comments