Cordless Pole Chainsaw and Pole Hedge Trimmer pack
6
Set-Up
IMPORTANT!
The chainsaw may come with plastic spacers over or around the bar studs - the spacer is for
shipping purposes only and must be removed before mounting the chain bar. After removing the chain brake
cover, remove any spacers, then mount the chain bar as described. Failure to remove any spacers before
assembling and using the chainsaw will present an injury hazard, damage the unit and will void the warranty.
WARNING!
Cutting edges on chain are sharp. Use protective gloves when handling chain.
1. Remove battery from chain saw.
2. Attach the poles together (
IMPORTANT
: When attaching the poles, arrow 1 should be in line with arrow 2,
as seen in the figure below).
3. With the locking knob, securely lock the pole joints together. (
IMPORTANT
: Do not use the pole tool unless
the pole joints are securely fastened, as shown in the figure below).
