Cordless Pole Chainsaw and Pole Hedge Trimmer pack
16
Pole Hedge Trimmer
Safety
Know Your Tool
•
WARNING!
Carefully observe the instructions in this manual to reduce the risk of personal injury or material
damage.
•
Read all of this manual carefully before operating the tool.
•
Before operating the tool, make sure that you know how to switch the tool off in an emergency.
•
Retain this manual for future reference.
General Safety Rules
•
WARNING!
Read all instructions. Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your battery
operated (cordless) power tool.
•
Save these instructions.
•
Work area
−
Keep work area clean and well lit. Cluttered and dark areas invite injuries.
−
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
−
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
•
Electrical safety
−
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
−
Do not expose power tools to rainy or wet conditions. Water entering a power tool will increase the risk of
electric shock.
•
Personal safety
−
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you’re tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
−
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
−
Avoid accidental starting. Ensure the switch is in the off position before plugging in. carrying power tools
with your finger on the switch or plugging in power tools that have the switch on invites accidents.
−
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
−
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
−
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
−
If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can reduce dust related hazards.
