Baumr-AG E force 360, Owner'S Manual

Page: 16 / 36

c) Disconnect the plug from the power source
before making any adjustments, changing
Such pre-
ventive safety measures reduce the risk of starting
d) Store idle power tools out of the reach of child-
the power tool or these instructions to operate
Power tools are dangerous in the
hands of untrained users.
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an
extent that functioning of electric tools could
before using the machine.
caused by poorly maintained power tools.
f) Properly
are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits
taking into account the working conditions and
Use of the power
5) Using and treatment of cordless tools.
a) Charge the batteries only in chargers recom-
mended by the manufacturer.
charger suitable only for a certain type of batteries
or, as appropriate, accumulators, if used for other
accumulators.
b) Use only such accumulators in this electric
appliance that have been designed for this
appliance.
Use of other accumulators may lead to
c)
Do not leave an accumulator not being used
or other small metal items that could cause
contact bridging.
Short circuit between accumu-
d) Liquid may leak from an accumulator if used
improperly. Prevent contact with such liquid.
of accidental contact. If liquid gets to your eye,
seek medical advice.
Liquid leaking from a battery
may cause skin irritation or burns.
6) Service
a)
This will ensure that the safety of the power
tool is maintained.
Safety instructions for Cordless lawn
mower
c) Do not expose power tools to rain or wet con-
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
Keep cord away from heat, oil, sharp edges
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f)
If operating a power tool in a damp location
Use of an RCD reduces the
risk of electric shock.
3) Personal safety
a)
Soyez attentif, faites attention à ce que vous
faites et faites preuve de bon sens lors de
l‘utilisation de l‘appareil électrique. N‘utilisez
jamais l‘appareil électrique si vous êtes fatigué,
-
ments. A moment of inattention while operating
b)
Use personal protective equipment. Always
wear eye protection.
as dust mask, non-skid safety shoes, hard hat, or
will reduce personal injuries.
c)
Prevent unintentional starting. Ensure the
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with
d)
Remove any adjusting key or wrench before
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
of the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or
Loose clothes, jewelle-
g)
If devices are provided for the connection of
Use of
4) Power tool use and care
a)
Do not force the power tool. Use the correct po-
tool will do the job better and safer at the rate for
b) Do not use the power tool if the switch does not
controlled with the switch is dangerous and must
be repaired.
14