Belt and Disc Sander - BD15
E&OE
© 2017 Baumr-AG
3
Product Use and Care
•
Always support the work-piece using
the work supports and ensure that the
belt/disc is pushing the work-piece
into the support when sanding.
•
Do NOT use worn or damaged (holes,
tears etc) belts/discs.
•
Maintain a 1.6mm maximum
clearance between the work supports
and sanding belt/disc.
•
Always sand in accordance with the
directional arrows.
•
Do NOT perform any operation
freehand.
General Service Information
•
Have the equipment serviced or
repaired at authorized service centres
by qualified personnel only.
•
Replacement parts must be original
equipment manufacturer (OEM) to
help ensure that equipment safety is
maintained.
•
Do not attempt any maintenance or
repair work not described in this
instruction manual.
•
After use, the equipment and
components may still be hot – allow
the equipment to cool and disconnect
spark plugs and/or electrical power
sources and/or batteries from it before
making adjustments, changing
accessories or performing repair or
maintenance.
•
Do not make adjustments while the
equipment is running.
•
Perform all service related activities
under suitable conditions, such as a
workshop etc.
•
Replace any worn, damaged or
missing warning labels immediately.
•
Do not clean equipment with solvents,
flammable liquids or harsh abrasives.
