16
5.4 Filter replacement
A filter is installed in color cameras. This filter can lead to limitations in the applicability of
the sensor for specific applications.
Proceed as follows to replace the filter.
Notice
Avoid contamination of the filter, sensor and the lens by dust and airborne particles!
Perform the filter replacement in a dust-free room with clean tools!
Procedure
1
2
3
4
1.
Insert the assembly tool (1) into the sensor opening. Place the two pins at the
front end into the locator holes of the filter holder (2).
2.
Turn the filter holder (2) until the guide tabs can be seen in the guide grooves
(4).
3.
Remove the filter holder (2).
4.
Carefully remove the existing filter (3). Do not touch the sensor!
5.
Insert the new filter into the sensor opening.
6.
Put the filter holder (2) back in.
7.
Turn the filter holder (2) until the guide tabs cannot be seen in the guide grooves
(4).
5.5 Cleaning
Filter / Cover glass
Notice
The sensor is mounted dust-proof. Remove of the cover glass for cleaning is not neces-
sary.
Avoid cleaning the cover glass of the sensor if possible. To prevent dust, follow the in-
structions under "Install lens".
If you must clean it, use compressed air or a soft, lint free cloth dampened with a small
quantity of pure alcohol.
