Baumer PA220, Operating Instructions Manual

Page: 34 / 53

PA220
34
www.baumer.com
7 Technical data
Technical data - electrical ratings
Voltage supply 21...53 VAC (50/60 Hz) or
10.5...70 VDC
85...265 VAC (50/60 Hz) or
100...300 VDC
Power consumption 6 VA, 5 W
Sensor supply 24 VDC ±25 % / max. 30 mA
Display LED, 7-segment display (programma-
ble display intensity in 4 levels, with
60 unit stickers for front)
Number of digits 4-digits
Digit height 10 mm
Display range -1999...9999 („OuE“ to signal
overflow)
Display refresh 500 ms
A/D transformer Principle ∑∆
Resolution 16 bit
Measuring rate 62/s
Measuring accuracy ±(0.1 % +3 digit)
Temp. coeffic. 100 ppm/°C
Analog input Current or voltage input
Programmable Measuring range
parameters Display range can be linearised
Decimal point
Display intensity
Display stabilization filter
Relay outputs with time delay or
hysteresis
Limits 2
Data memory >10 Jahre in EEPROM
Outputs relay Normally open or closed,
programmable SET 1, SET 2
Interface RS485
Standard Protection class II
DIN EN 61010-1 Overvoltage category II
Pollution degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2