14
SETTING THE MOON PHASE
14
The setting of the moon phases on this watch does not have
rapid correction, and thus is accomplished using the time-
setting.
1) Pull the crown to Position 2.
2) Turn the crown to advance the hands (A, B) clockwise.
This also has the effect of rotating the moon-phase disc
(I) by jumps (one jump per day).
3) Continue to turn the crown to rotate the moon-phase disc
of (I) by jumps until the full moon appears in the center of
the aperture.
4) Continue turning the crown in order to bring about as
many jumps as there are days passed since the last full
moon (consult a calendar).
5) Reset the crown (Position 1).
CHRONOGRAPH : SIMPLE FUNCTION
26
P1 :
Start/stop push-button. Press once to start the chrono-
graph (F=seconds, G=minutes, J=1/10 second). Press a
second time to stop.
P2 :
Reset push-button.
To measure several successive times, without counting
intervals,
press the
P1 push-button several times conse-
cutively,
as follows:
1) Start.
2) Stop and read.
3) Start.
4) Stop and read.
This operation may be repeated as often as desired to mea-
sure successive times.
5) Press the
P2
push-button to reset the chronograph to
zero.
CHRONOGRAPH: ADDITIONAL FUNCTION
“SPLIT-SECONDS”
26
To measure intermediate time periods with a split-seconds
hand.
1) Press the
P1
push-button to start the chronograph.
2) Press the
P2
push-button to read the intermediate time.
3) Press the
P2
push-button to reset and read the time
elapsed.
Operations 2 and 3 may be repeated as often as desired to
measure any number of intermediate times.
4) Press the
P1
push-button to stop the chronograph and
read the final time.
5) Press the
P2
push-button to reset the chronograph to
zero.
Summary of Contents for Watch
Page 1: ......
Page 27: ...BAUME MERCIER 2012 MPE20093 MADE IN SWITZERLAND ...
