BAUMATIC
SUPREMA1W/SS dishwasher user manual
12
STARTING A WASH CYCLE
1
2
10 9
8
7
6 5 4 3
STARTING A WASH CYCLE
1)
MAKE SURE THAT THE PLUG OF THE APPLIANCE IS INSERTED INTO THE WALL SOCKET.
2)
MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3)
LOAD THE DISHWASHER (SEE THE SECTION ENTITLED ‘LOADING YOUR DISHWASHER’).
4)
POUR IN DETERGENT (SEE THE SECTION ENTITLED ‘SALT, DETERGENT & RINSE AID’).
5)
TURN THE KNOB LOCATED ON THE RIGHT OF THE CONTROL PANEL CLOCKWISE UNTIL THE NUMBER OR
THE SYMBOL FOR THE CYCLE SETTING IS ALIGNED WITH THE REFERENCE MARK (SEE THE SECTION
ENTITLED ‘WASH CYCLE TABLE’ ON NEXT PAGE).
6)
PRESS THE ‘ON/OFF’ BUTTON. THE ON/OFF LIGHT WILL COME ON. THE WASH CYCLE WILL NOW BEGIN.
Note
:
The Delay Timer key (in above figure as mark number ‘6’) will set the start of the
washing cycle by 30mins into the future for every press. You can set it up to 9½
hours ahead of time for your convenience.
Approximate Timing of Wash Cycles
Intensive
12
(strong)
139
mins.
Normal
Economy
150
mins.
Rinse
95
mins.
Glass
76
mins.
Soap
103
7
mins.
mins.