Baumatic Pythagora P61SS, Instruction Manual

Page: 22 / 28

22
as tap maintenance
nance operations MUST ONLY be carried
ut by a CORGI registered engineer.
ance operations,
disconne t the appliance from the gas and electricity supplies.
follows:
ing
screws and clamps.
o
the worktop and remove any underside
protective covers.
o
gs holding the tap to the fascia panel and
separate the assembly. Then clean the cone and seating, with
o
temperature grease,
reassemble into position and rotate a few times.
o
rease,
making sure that the gas ducts are not obstructed with
o
reassemble the components and perform a gas
soundness test.
If it becomes necessary to replace a gas tap, then you should proceed
s follows:
ove the control knobs, pan supports, burners, hob fixing
screws and clamps.
o
the worktop and remove any underside
protective covers.
o
gs holding the tap to the fascia panel and
separate the assembly.
o
from the gas tap, then disassemble
them from the gas rail by removing the fixing screws.
o
ed.
then reassemble the hob.
G
These mainte
o
ANT: Before carrying out any mainten IMPORT
c
If a gas tap becomes stiff to operate, then you should proceed as
o
Remove the control knobs, pan supports, burners, hob fix
Remove the hob from
Disconnect the fixin
a cloth dampened with solvent.
Lightly smear the cone with high
Remove the cone again and remove any excess g
grease.
Carefully
a
o
Rem
Remove the hob from
Disconnect the fixin
Disconnect the gas pipe
When fitting a new tap, ensure that a new gasket is us
o
Reconnect the gas tap, perform a gas soundness test and