Baumatic PO900SS, User Instruction, Page: 22 / 36

22
o
The length of cleaning cycle can be increased by pressing the
s
.
o
On this oven function it is possible to increase the oven
en the temperature
inside the oven reaches 300°C. When this happens, the oven will
l will
light to indicate that the door is locked.
n
should
use a soft damp cloth to wipe out the resultant ash deposits. For
o
When the pyrolytic cleaning cycle has completed, the oven will
sh and the heating symbol will disappear.
ight
nual
operation mode, you should press the manual operation button.
turn the thermostat control knob and
oven function selection knob to the off position, then the
appliance will continue to operate as soon as you press the
manual operation button.
manual operation button and then pressing the timer plu
button. This may be necessary if the oven is heavily soiled
temperature to 475°C; you should do this by turning the
thermostat control knob to its maximum setting.
o
The oven door will automatically lock wh
give off an acoustic signal and a light on the control pane
o
During pyrolytic cleaning, the oven light will remain on.
o
After the set time period has elapsed, the oven door will remai
locked until the oven temperature has fallen below 300°C.
o
When the oven has reached a warm temperature, you
best cleaning results, you should not allow the oven to get
completely cold before wiping away the ash deposits.
switch off and an alarm will sound. The word AUTO (or A
symbol) will fla
o
DO NOT attempt to open the oven door, until the door lock l
has gone out.
o
To silence the audible signal and return the oven to ma
The word AUTO (or A symbol) will disappear from the display
and the manual operation symbol will appear instead.
o
Important: If you do not