35
•
To prevent leakage from the connection joints, a seal (for machines with
cold water inlet only) or seals (for machines with hot & cold water inlets)
are included in the hose packing. Fit these seals at the end of the water
inlet hoses on the tap side.
If your sink only has a mixing tap
, use only
one hose and connect it to the cold water valve of the machine. In this
case, screw on the supplied cap to close the hot water valve.
1) Connect the WHITE-HEADED HOSE to the WATER INLET VALVE with the
white filter & connect the RED-HEADED HOSE to the WATER INLET
VALVE with the red filer (this is only applicable to machines with double
inlet systems).
2) Tighten (but do not over-tighten) the plastic parts of the connections with
your hand. Please call a qualified plumber to ensure safer connections.
PLEASE NOTE:
Summary of Contents for MEGAWDSS
Page 1: ...1 MEGAWDSS 60 cm Stainless steel washer dryer ...
Page 28: ...27 NOTES ON STAINS AND HOW TO REMOVE THEM FROM YOUR CLOTHES ...
Page 29: ...28 ...
Page 40: ...2 2 ...