Baumatic MEGA90, Instruction Manual, Page: 34 / 40

BAUMATIC
MEGA 90 dishwasher user manual
33
j) NOW GET THE DISHWASHER LEVEL.
NOTE: YOUR
DISHWASHER MUST
BE LEVEL FOR
PROPE
WARNING!
BE CAREFUL WHILE YOU ARE
LEVELLING YOUR DISHWASHER
R DISH RACK
OPERATION AND
PERFORMANCE.
IN PLACE – IT COULD TIP OVER
AND INJURE YOU!
W
WASH
CONSULT THE FIGURE BELO
FOR HELP!
TH ET CAN BE ADJUSTED FROM THE FRONT OF THE DISHWASHER BY TURNING THE SCREWS ON THE
LEF IGHT HAND SIDES OF THE CABINET. TO ADJUST THE FRONT FEET, USE A WRENCH / SPANNER AND
FEET UNTIL THE DISHWASHER IS LEVEL (PLEASE SEE ‘REMARK B’ IN THE ABOVE FIGURE).
USTER POLE CLOCKWISE, THE BACK FOOT WILL DRIVE UP THE DISHWASHER.
LEASE SEE ‘REMARK A’ IN THE ABOVE FIGURE).
HWASHER MUST NOW BE SECURED
THERE ARE TWO WAYS TO DO THIS, DEPENDING ON YOUR TYPE OF WORK
AT YOUR DISHWASHER’S WEIGHT MUST REST ON ITS FEET. THE
ITS TOP ARE TO GIVE STABILITY AND WILL PREVENT IT FROM TIPPING
FACE
E REAR FE
T AND R
TURN THE FRONT
WHEN YOU ROTATE THE ADJ
(P
k) THE DIS
IN PLACE
.
SURFACE. REMEMBER TH
FASTENINGS AT
FORWARD:
NORMAL WORK SUR - SECURE TO THE WORK SURFACE’S UNDERSIDE BY USING TWO
HAT THE DISHWASHER CAN OPEN AND CLOSE COMFORTABLY.
WORK TOP
WOODSCREWS ENSURING T
MARBLE OR GRANITE
– FOR THESE WORKTOPS, YOU WILL NOT BE ABLE TO
DISHWASHER TO THE UNDERSIDE OF THE SPECIAL WORK SURFACE.
, YOU WILL HAVE TO SECURE THE BRACKET TO THE SIDE PANELS OF THE
AND SECURE THE DISHWASHER TO THE FURNITURE HOUSING. PUT THE
E SCREW.
NOTE: DO NOT PUT ANY WEIGHT FROM THE DISHWASHER ON THESE SCREWS – ENSUR
SECURE THE TOP OF THE
BECAUSE OF THIS
DISHWASHER CABINET
RUBBER CAP OVER TH
E
YOUR DISHWASHER’S WEIGHT RESTS ENTIRELY ON ITS FEET.
33