Baumatic MEGA90, Instruction Manual

Page: 13 / 40

BAUMATIC
MEGA 90 dishwasher user manual
12
STARTING A WASH CYCLE
1) MAKE SURE THAT YOUR DISHWASHER’S
PLUG HAS BEEN PUSHED ALL THE WAY
INTO THE WALL SOCKET.
2)
MAKE SURE THAT THE WATER SUPPLY IS
TURNED ON TO FULL PRESSURE.
3)
LOAD YOUR DISHWASHER (SEE THE
SECTION ENTITLED ‘LOADING YOUR
DISHWASHER’, PAGES 8-11).
4)
POUR IN DETERGENT (SEE THE SECTION
ENTITLED ‘SALT, DETERGENT & RINSE
AID’), PAGES 5-7.
5) OPEN THE DOOR, PRESS THE
‘ON/OFF’ BUTTON AND THE
‘ON/OFF’ LIGHT WILL COME ON.
6) PRESS THE ‘P’ KEY (PROGRAM KEY)
TO SELECT THE ‘WASH CYCLE’. SEE
TABLE ON NEXT PAGE FOR WASH
CYCLE TYPES.
7) CLOSE THE DOOR. THE WASHING
WILL START AFTER
APPROXIMATELY TEN SECONDS.
• REMEMBER: YOU CAN PROGRAM YOUR DISHWASHER UP TO 24 HOURS IN
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE
DESIRED DELAY HAS BEEN SET.
•
.
Approximate Timing of Wash Cycles
Intensive
(strong)
127 mins.
Normal
117 mins.
Economy
102 mins.
Rinse
50
mins.
Glass
70
mins.
Rapid
45
mins.
Soap
7
mins.
Note:
When you turn your dishwasher on, the number ‘OO’ should show on the display. If you see any
other digits, such as ‘17’ or ‘01’, ‘02’, ‘03’, etc., please refer to the trouble-shooting section on page 19.
12
Note:
The Delay Timer key will set the
start of the washing cycle by one hour
into the future for every press. You
can set it up to 24 hours ahead of time.
Delay timer key is marked as ‘5’ in the
picture on the right.