Baumatic FG65, User And Installation Instructions Manual

Page: 8 / 20

USER INSTRUCTIONS
INSTRUCTIONS FOR USE
These User Instructions should be retained for future reference and for use by a person
who is perhaps unfamiliar with the appliance.
The following models are covered by these instructions:
BK60 BK71 BKWK1
BK61 BK16.5
BK6 3 BK16.6
BKT62 BK17.5
BK68 BK18.5
BK69 BKG2
USING THE HOB
The symbols on the Control Panel fascias show which burner the Control Knob operates.
Dependent on the model there are two methods for igniting the burners.
1. Auto Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame
symbol, the ignition spark will operate as long as the knob is pressed down.
When a flame has been established the knob can be released.
2. Manual Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame
symbol, press the ignition button located on the control panel.
The ignition spark will operate as long as the button is held down. When a flame has
been stablished, release the button.
To regulate the flame, continue turning anti-clockwise to the required setting between the
large and small flame symbols.
To turn the burner off, turn fully clockwise.
NOTE:
When a Thermocouple Safety Device is incorporated in the appliance, it is necessary for
the knob to be continuously held down for a further period of approximately 10 seconds
after the flame has been established to enable the thermocouple to function.
The Safety Device is designed to stop the flow of gas to the burner head in the event of a
flame out situation.
6
BK44
FG65SS