![Baumatic EASYICE 1SL Instruction Manual Download Page 9](http://html1.mh-extra.com/html/baumatic/easyice-1sl/easyice-1sl_instruction-manual_2709986009.webp)
Your Baumatic EASYICE1W / EASYICE1SL Ice Maker
8
Operation Instructions
1. Open the lid cover and fill with water. Make sure the water
level in the water tank is not over the ice cube tray.
2. Plug the unit into the power supply and the red indicator (M)
in the operation panel will flicker. This indicates that the
machine is in standby status.
3. Select the size of ice cube by pressing the “SELECT” button.
You can choose one of three sizes of ice cube: S (small),
M(Medium) and L(large) with each’s indicator lit accordingly.
4. Press the START button to run the unit. In normal working
conditions, the machine can make 12 pieces of ice cube each
cycle.
Â
If the ice cube is set on
small
size, the cycle time is about 8
minutes;
Â
If the ice cube is set on
medium
size, the cycle time is about
10 minutes;
Â
If the ice cube is set on
large
size, the cycle time is about 12
minutes.
NOTE: For the machine’s very first run, the cycle time to make
ice cubes may be longer than in normal working conditions.
5. During each cycle, 12 ice cubes will be collected in the
storage bin automatically. When the storage bin is full, the
relevant indicator will be lit in green and the compressor and fan
motor will stop. You should open the door and collect the ice
cubes before putting them in a low temperature appliance to
keep them from melting.
6. When the water level is too low, the “FILL WATER” indicator
will light and the compressor/fan motor will stop. Then you
should check the level, add water and restart the unit to make
more ice cubes.
7. If you no longer want to make ice cubes, just press the
“STOP” button to stop the unit.
8. For best performance, water temperature should be between 7
and 35
°C
and ambient temperature between15 and 25
°C.
.