Baumatic BWM1417W, Instruction Manual

Page: 22 / 40

22
Cleaning the water inlet filter
o
Clean the filter when water leaks from the water inlet.
o
Always pull the power plug out before cleaning.
o
Turn off the water supply to the washer and separate the inlet
hose.
o
Rotate the inlet water pipe anticlockwise to
release.
o
Remove the dirt from the inlet filter with a
brush before replacing it.
Winter storage
o
You should install your appliance in a location where it will not be
subjected to freezing temperatures.
o
If you are going to store your appliance in a location where the
temperature will drop below freezing in winter, then you should
follow the table below.
To winterize the washer To use the washer again
• Turn off the water supply.
• Disconnect and drain the water
inlet hoses.
• Run the washer on a drain and
spin setting for one minute.
• Unplug the power supply cord.
• Flush the water pies
and hoses.
• Reconnect the water
inlet hoses.
• Turn on the water
supply.
• Reconnect the power
supply cord.