o
Use a screwdriver to remove the glass cover that sits over the
bulb. Unplug the light bulb that needs to be replaced and insert a
new G4 20W (max) bulb. Then replace the glass cover.
o
IMPORTANT: Defective bulbs should be replaced immediately.
o
If the lights still do not work, make sure that the bulbs are fitted
properly into their housings before you call for technical
assistance.
o
Refit the grease filters.
Fitting the carbon filter
If the appliance is going to be used in recirculation mode then it is
necessary to fit a carbon filter. This will help to absorb unpleasant
odours caused by cooking.
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTER, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
COOKER HOOD FROM YOUR MAINS SUPPLY.
1) Remove the grease filters.
2) There are four screws holding the light fixture into place. These
should be removed allowing the light fixture to be dropped slightly
away from the main body of the hood.
13
